본문 바로가기
인테리어(Interior)

자연광을 받아들인 오픈오피스 [VMware Promontory Headquarters] Valerio Dewalt Train

by 디핸 2019. 9. 21.


Valerio Dewalt Train의 VMware Promontory Headquarters

Valerio Dewalt Train은 캘리포니아 팔로 알토에 위치한 캠퍼스 본사의 Building E를 위한 리노베이션 설계를 위해 VMware에 의해 고용되었다. Palo Alto에 있는 Promontory 캠퍼스에 있는 VMware의 기존 본사는 29에이커의 부지에 있는 8만 평방 피트의 2층짜리 사무실 건물 5개로 구성되어 있다. 클라우드 컴퓨팅 및 플랫폼 가상화 소프트웨어 및 서비스 제공업체는 Valerio Dewalt Train Associates(VDT)에 인력 증원, 직원 간 협업 및 혁신 촉진, 개인 사무실 의존에서 90% 개방으로 전환하기 위한 단계적 접근 방식으로 각 5개 건물을 혁신할 것을 요청했다.ces와 10%의 개인 사무실 가장 오래된 세 개의 건물에서는, 사립 사무실들이 주변을 점령했고, 중간에 열린 사무실들은 캠퍼스의 아름다운 유산인 오크와 삼나무의 시야와 단절되어 있었다.

VDT는 1단계에서 나머지 건물들을 개조하기 위한 시제품으로 Promontory E를 개조했다. 원래 설계한 대로, 각 건물은 2층 아트리움을 개방된 사무실로 둘러싸여 있었으며, 아트리움의 좌석 영역에서 발생하는 소음으로 인한 완충 작업 영역에 대한 장벽이 없었다. 회의 공간, 휴게실, 게임실을 아트리움 주변의 건물 중심부로 이동시킴으로써, 리노베이션은 열린 사무실 지역에 음향 분리를 제공한다.

대형 유리로 된 문은 회의실을 음향적으로 보호하면서 아트리움까지 시각적으로 개방한다. 기존의 휴게실은 좁고 완전히 밀폐되어 있었다. 새로운 휴게실은 심방에 열려있는 부유함을 차지하고 있어 접근성과 유연성을 향상시키고 대규모 모임을 수용할 수 있었다.

주변을 따라 열린 사무실 지역을 배치하면 캠퍼스 경관을 볼 수 있고, 풍부한 일광을 볼 수 있다. VDT의 체험적 디자인 스튜디오인 미디어 목표(M-O)는 내부의 자연 테마를 계속하기 위해 사무실 전체에 걸쳐 다양한 추상화 수준에서 별자리를 나타내는 대형 벽 그래픽을 개발했다. M-O는 또한 별자리 이름을 따서 회의실을 명명했다.

대형 바닥판을 분해하기 위해 작업대는 각각 약 40개의 이웃으로 구성되어 있으며, 화면과 일련의 협력 공간으로 분리되어 있다. 음향적으로 적합한 재료, 천장 처리 및 바닥 처리의 전략적 선택은 작업 영역에서 주변 소음을 감소시키는 데 도움이 된다. 쿼드 워크스테이션 레이아웃은 VMWare가 인력을 추가로 늘리기로 결정할 경우 벤치마킹을 처리하도록 설계되었다. 이 리노베이션은 또한 더 따뜻하고 밝은 색 팔레트를 제공하기 위해 마감재를 교체했다.

VMware Promontory Headquarters by Valerio Dewalt Train

Valerio Dewalt Train was engaged by VMware to design the renovation for Building E of their campus headquarters located in Palo Alto, California. VMware’s existing headquarters at its Promontory campus in Palo Alto consists of five 80,000-squarefoot two-story office buildings on a 29-acre site. The provider of cloud computing and platform virtualization software and services asked Valerio Dewalt Train Associates (VDT) to renovate each of the five buildings in a phased approach to allow for increased headcount, to promote collaboration and innovation among staff, and to transition from a reliance on private offices to 90 percent open offices and 10 percent private offices. In the three oldest buildings, private offices occupied the perimeter, with open offices stuck in the middle, cut off from views of the campus’s beautiful heritage oaks and redwoods.

For the first phase, VDT renovated Promontory E as a prototype for revamping the rest of the buildings. As originally designed, each building had a two-story atrium surrounded by open offices, with no barriers to buffer work areas from noise from the atrium’s seating area. By moving conference spaces, the break room, and the game room to the heart of the building around the atrium, the renovation provides acoustic separation for the open office areas.

Large glazed doors open the conference rooms up visually to the atrium while protecting them acoustically. The existing break room was small and fully enclosed; the new one occupies a floating box open to the atrium, allowing for greater accessibility and flexibility of use and accommodating larger gatherings.

Placing open office areas along the perimeter frees up views to the campus landscape and brings in plentiful daylight. To continue the nature theme inside, VDT’s experiential design studio, Media Objectives (M-O), developed large wall graphics that represent constellations in varying degrees of abstraction throughout the offices. M-O also named conference rooms after constellations.

To break up the large floor plates, workstations are organized into neighborhoods of about 40 each, separated by screens and an array of collaborative spaces. Strategic selection of acoustically appropriate materials, ceiling treatments, and floor treatments helps keep ambient noise down in work areas. The quad workstation layout is designed to handle benching should VMWare decide to further increase headcount. The renovation also replaced finishes to provide a warmer, brighter color palette.

Design: Valerio Dewalt Train
Contractor: NOVO Construction
Photography: Bruce Damonte











source : retaildesignblog


댓글